Skip to content
HHO Kit HHO Generator for Trucks iX20 Plug-N-Play Predator Advanced 30LPH - www.HHOKIT.ie

HHO kit for trucks boats gensets 1.0<5.0L engines All Plug-N-Play iX20 Predator Advanced

Save $105.00 Save $105.00
$395.00
$395.00 - $395.00
$395.00
$290.00
$290.00 - $290.00
$290.00
Color: Grey/Blue

Introducing our All-In-One, Low Smoke, Odourless, Plug-N-Play HHO Kit iX20 HHO 30LPH MK5! Experience Active Engine Carbon Cleaning, Fuel Savings, and No Installation Required for engines 5000cc. 

Our pre-installed HHO kit is the perfect solution for a quick and hassle-free upgrade to your vehicle. In just 5 minutes and 3 easy steps, witness improved fuel efficiency and reduced emissions effortlessly.

Unrivalled benefits of the HHO iX-CELL with PWM.

  • 10 Years warranty on HHO X-CELL generator inside;
  • All HHO Kits are Plug-N-Play Pre-installed; 
  • Ready to use in 5 minutes; 
  • No Required To Install; 
  • HHO generator with 2V low energy 20X-cells PWM for 12V-24V; 
  • Build-in HHO generator + Water tank + level sensor + Bubbler; 
  • Engine Start/Stop vibration sensor with relay; 
  • No need for an antifreeze solution until -60°C+50°C
  • All User-Friendly.
  • It is calibrated for thermodynamic law!
  • No bumper installation is required, 
  • The HHO X-cell is the thinnest and smallest HHO KIT, 
  • All-In-One, Plug N 'Play ever made in Ireland EU by HHO FACTORY, 
  • 2XPWM 66W NEW*, CELTIC TIGER ™ uses maximum KOH90-95%(NaOH98%); 
  • LCD 4-in-1: wattmeter, voltmeter, amperemeter, total energy, 6-100V 20A; 
  • Auto power ON HHO X-Cell when the engine is running; 
  • Auto power OFF HHO X-Cell when the engine is turned OFF;  
  • Heavy-duty aluminium waterproof case with Plug-N-Play; 
  • You feel free and without limits, without overheating, without overload, 
  • The new X-Cell HHO kits are suitable for tropical heat up to 50°C, 
  • It does not need an antifreeze mixture down to -60°C. 
  • 190ml of water is for 18h or 1800km with 80-120 watts of Low Smoke and Odorless Carbon Cleaning. Maximal fuel saving with minimum watts is for 72 hours or 7200km.

HHO kit Description:  

  • HHO 2x10 iX-Cells 3D spacers NEW*: HH - Cathodes, O + Anodes, no need for neutral plates; 
  • Energy consumption 50-100W NEW*; 
  • HHO production up to 30LPH  NEW*; 
  • Water Refuelling approx. 1500-3000km or nonstop production every 30 hours; 
  • Dimension: Width 175mm 6.8" x High 255mm 9.6" x Deep 40 mm 1.6"; 
  • Operating voltage - Only 2.0V converted from  12V/24V/36V; 
  • Electrodes producing area – Stainless Steel 316L; 
  • Durable composite body used in sports cars up to 230°C peaks (No plastic); 
  • Fitting material: durable brass, nickel surface; 
  • Working temperature -40°C +50°C

List of parts for version Plug-N-Play All-In-One:

  • 1x HHO Generator low energy NEW* 20 iX-Cells waterproof Plug-N-Play pre-installed built-in; 
  • 1x Water Tank - waterproof Plug-N-Play, pre-installed built-in; 
  • 1x Internal Bubbler - waterproof Plug-N-Play, pre-installed built-in; 
  • 1x Water level sensor - waterproof Plug-N-Play, pre-installed built-in; 
  • 2x External Bubblers with 6 Psi safety valve 350ml; 
  • 2x 66W PWM NEW* 2V-12V/24V/36V Celtic Tiger™, efficiency ratio 4.8MLPM:1WATT; 
  • 1x Wireless PWM Control 30A 12/24V 360W GIFT*; 
  • 1x Wifi Remote control universal GIFT*; 
  • 1x LCD Display 240w 20A 4-in-1 Watts. Volts, Amps, Total Energy; 
  • 1x Start/Stop Relay with voltage detection 20A with menu and two buttons;  
  • 1x Battery twin cable double-wall +/- waterproof Plug-N-Play; 
  • 1x Fuse holder waterproof with rings; 
  • 1x Fuse; 
  • 1x Cap plug Nylon; 
  • 1x Elbow push in 1/4" ID 8mm for air-intake; 
  • 1x Straight push in 1/4" ID 8mm treated High-quality Stainless Steel 316;
  • 1x Elbow push in 1/4" ID 8mm treated High-quality Stainless Steel 316;
  • 1x Clear Pneumatic Teflon pipe 3m; 
  • 8x Mounting built-in; 
  • 1x Mesh plate with bolts, spring washers, flat washers, and nuts; 
  • 4x Cable tie Heavy duty 1000mm x 9mm;
  • 1x Syringe 100ml;
  • 3x Potassium hydroxide KOH 90% electrolyte 250g enough for one year; 
  • 6x Butterfly bolts M5 Stainless Steel; 
  • 6x Nuts M5 stainless steel; 
  • 6x Flat washers stainless steel; 
  • 6x Spring washer stainless steel; 
  • 4x Self-taping screws Ø4.8mm NEW*. 
* NEW from 09-AUG-2023.

For achieving the best results, we recommend using an HHO Kit with REF to reduce engine friction click here, together with an HHO chip click here.

For more knowledge please watch videos at https://hhofactory.com/pages/videos

Please follow manual at https://hhofactory.com/blogs/hho-manual/hho-kit-hho-installation-manual-plug-n-play

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare